Electron Microscope Accessories
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Square 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Formvar Support Film 5-6 nm thick on Hexagonal 200 mesh Copper Grid
A thin film of pure formvar resin coats the shiny side of a hexagonal grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Standard coating is 5 to 6 nm thick.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Square 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Grainger Machine Vise 2 Fixed
The Dayton Machine Vise has a 2 inch jaw face and a maximum jaw opening of 2 inches. It is made of ductile iron with a hardened steel vise screw and replaceable steel jaw plates. The vise has a flat base that allows it to be permanently mounted. The vise can handle up to 550 lbs of clamping force. This medium duty machine vise is suitable for precision workholding applications.
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Single 1500 µm hole Nickel Grid
A thin film of pure carbon deposited on the shiny side of the single hole grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Nickel
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on London Finder LF135 Copper Grid
A thin film of pure carbon deposited on the shiny side of a London Finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Copper
Thickness: 5-6 nm
Electron Microscopy Sciences EMS Lacey Carbon Film 50 µm holes on 300 mesh Au
This carbon coated film on a broken pattern consists of woven-mesh-like holes of different sizes and shapes. This type of pattern provides support but does not interfere when observing specimen sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Gold
Hole: 50 µm
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Single 75 µm hole Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Instech Luer stub / blunt needle, 19ga x 0.5in (12mm). Brown. Nonsterile, pack of 100.
The Instech LS19 is a 19‑gauge brown luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It is built with a polypropylene hub and a stainless‑steel blunt, deburred tip to prevent tubing damage. LS19 is supplied non‑sterile in a pack of 100 and is commonly used in laboratory infusion, sampling, and catheter‑based workflows.
Features
- Gauge: 19ga (brown hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion, sampling, and preclinical catheter workflows
Electron Microscopy Sciences Goniometer Bases, Type B3
Goniometer Bases tightly capture the MicroRT tubing for seamless room and low-temperature data collection.
Electron Microscopy Sciences Standard Pin SEM Stub Mini, 6.6 x 1.3 mm Head, 9.5 mm Pin, Aluminum
Mini SEM pin stub mount for Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, Tescan, ETEC and Amray. Made from lathe finished ultra-pure aluminum.
Head: 6.6 x 1.3 mm
Pin height: 3/8"
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Hexagonal 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on 2 X 1 mm Slot Grid Copper Grid
A thin film of pure carbon deposited on one side of the slot grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Copper
Electron Microscopy Sciences Metallurgical Mount Holder 1" and 30 mm, 3.2 mm x 8mm Pin
This mount holder which is made from machined aluminum with stainless steel Allen screws. Desgned specifically for use with 1 1/4" and 30 mm metallurgical mounts.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 2/2 on Gold 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Gold
Mesh: 400